View SF163C_4420338.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SUPER FAST GLASS PASSIVATED RECTIFIER
SF161C THRU SF166C
FEATURES
* * * * * * *
VOLTAGE RANGE CURRENT
50 to 400 Volts 16.0 Ampere
TO-220AB
* *
Super fast switching speed Glass passivated chip junction Low power loss, high efficiency Low leakage High surge capacity High temperature soldering guaranteed 250/10 second, 0.16(4.06mm) lead length Also available with common Anode, add an "A" suffix, i.e. SF161CA, add as a doubler, add a "D" suffix, i.e. SF161CD Also available in an isolated package, SFF161C Also available in the single chip version, SF81
MECHANICAL DATA
* * * * * *
Case: Transfer molded plastic Epoxy: UL94V-0 rate flame retardant Lead: Solderable per MIL-STD-202E method 208C Polarity: as marked Mounting position: Any, 5 in-lbs Torque Max Weight: 0.08ounce, 2.24 gram
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS SF161C SF162C Maximum Repetitive Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100
Maximum Average Forward Rectified Current At Tc=100 Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage per at 8.0A Maximum DC Reverse Current at rated TA = 25 DC Blocking Voltage at T = 125
A
* * *
SF163C 150 105 150
SF164C 200 140 200
SF165C 300 210 300
SF166C 400 280 400
UNIT Volts Volts Volts Amps Amps
I(AV) IFSM VF IR trr CJ RJC TJ TSTG 35 0.975
16.0 125 1.4 10 500 50 40 2.5 (-55 to +150) (-55 to +150)
Volts A nS pF
/W
Maximum Reverse Recovery Time Test conditions IF =0.5A, IR =1.0A, IRR =0.25A Typical Junction Capacitance (Measured at 1.0MHz and applied reverse voltage of 4.0V) Typical Thermal Resistance (Note 1) Operating Junction Temperature Storage Temperature Range
Notes: 1. Unit mounted on heatsink
E-mail: sales@cnmic.com
Web Site: www.cnmic.com
SUPER FAST GLASS PASSIVATED RECTIFIER
SF161C THRU SF166C
VOLTAGE RANGE CURRENT
50 to 400 Volts 16.0 Ampere
RATING AND CHRACTERISTIC CURVES SF161C THRU SF166C
FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT,
24
FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE
20
150
16
CURRENT, (A)
8.3ms Single Half Sine-Wave (JEDEC Method) T= Tjmax 100
(A)
12
Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375(9.5mm) Lead Length
8.0
50
4.0
0 0 25 50 75 100 125 150 175 0 1
1 Cycle 2 4 6 8 10 20 40 60 100
AMBIENT TEMPERATURE, ( C)
NUMBER OF CYCLES AT 60 Hz FIG.4-TYPICAL REVERSE CHARACTERISTICS PER LEG
FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG
100
TJ =125 C
100
INSTANTANEOUS FORWARD CURRENT,
INSTANTANEOUS REVERSE CURRENT, (A)
10
0V
/ 20
10
(A)
0/ 1
50
30
0/
40
0V
1.0
50
/1 0
1.0
TJ=25 C
TJ =25 C Pulse Width=300us 1% Duty Cycle
0.1 0.4 0.8 1.2 1.6
0.1
INSTANTANEOUS FORWARD VOLTAGE,(V)
0.01 0 20 40 60 80 100 120 140
FIG.5-TYPICAL JUNCTION CAPACITANCE PER LEG
100
PERCENT OF RATED PEAK REVERSE VOLTAGE,(%)
JUNCTION CAPACITANCE,(pF)
F1G.6-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC
Trr
50 10 NONINDUCTIVE NONINDUCTIVE (-) 10 (+) 25 Vdc (approx.) (-) T J =25 C f=1MHz Vsig=50mVp-p D.U.T. PULSE GENERATIOR (NOTE 2) (+) OSCILLOSCOPE (NOTE 1)
+0.5A
0 -0.25A
1 NON INDUCTIVE
-1.0A
1cm
1 0.1 1.0 10 100
REVERSE VOLTAGE,(V)
NOTES : 1.Rise Time=7ns mas. Input Impedance= 1 magohm. 22pF 2.Rise time=10ns max. Source Impedance= 50 ohms
SET TIME BASE FOR 50/100ns/cm
E-mail: sales@cnmic.com
Web Site: www.cnmic.com

▲Up To Search▲

Price & Availability of SF163C

	To Download SF163C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .